Many gutters are short-lived. Eventually, there will be a day when you need to check its condition.
Damage to the roof, light, rain and other factors can damage the leaky trough.
There are the most common problems that occur in the gutters. Leakage, overfilling, sagging and water formation around the house is what happens if you do not clean the gutters on time.
However, do not worry; I know how to protect your home from a disaster. There are some tips for you.
Test of Strength
The first thing you need to do is check the condition of the gutters. Check an availability or prerequisites for leaks or sagging.
Silicone and all ribs of the gutter should be intact, as this is the main cause of leakage. If the edges of the gutter have become unusable, then it is not related to the quality and strength of the gutter.
Such damage is caused by a reaction to chemical solvents in water, internal water pressure and so on.
When you discovered this problem, replace the old mount with a new one. You can do it with a knife.
The material is important too. If the gutter guard is not metal, but a sponge or something like that, it will rot with a large amount of water.
In some cases, repairs are useless. Be sure that the resulting crack will not cause damage to the entire drainage system. If so, change the gutters or just a part of that.
What to Do if a Leak Drains
As I said, the gutters flow from the cracks between the sections. It is because the water does not go into the downpipe and remains in the gutter.
If you notice a leak, check the gutter inside. The water is still standing there. Remove the water from there before the gutter begins to sag.
Adjust the hangers on which the gutter holds and dry the gutter inside. Additionally, you must clean not only the seams but also the entire gutter.
It is necessary so that you can treat the entire surface of the gutter with a silicone rubber seal. Do it as inside, as well as outside the gutter.
Leakage repair is the application of a sealant or the replacement of a damaged area with a new one. You do not need many tools besides a cone pistol and silicone sealant.
There are also other causes of leaks. For example, the gutter may be blocked or crowded. Then you need to unlock the gutter and let the water into the downpipe.
Due to a large amount of water, the gutter can sag. This part of the gutter will no longer function as before. Replace this site with a new one. Or, the gutter can be installed not on the slope. It prevents the drainage of water, so adjust the position of the gutter.
The material may not be as good. For instance, if you are dealing with cast iron, then such material will rust and leak. Paint more often cast-iron gutters.
Why Gutters Overcrowded
The next problem is about crowded gutters. When the trough is overflowing, it is fraught with the emergence of a threat to the house foundations.
Gutters overcrowded due to heavy rain or blockage. Because of that, water does not pass into the downpipe. Sometimes the gutters sag and prevent water from leaving.
If you regularly clean the trash of garbage, then the occurrence of this problem is almost impossible.
It is quite easy to prevent overcrowded gutters. To do this, it is enough to clean the gutter regularly. After a cork of leaves and splinters can break the gutter.
Where Do the Holes in the Gutters Come
Undesirable holes in the gutters are quite common. As a rule, this reason also arises because of a garbage clog.
To cut the problem, you need to divide the sections and remove the trash from the gutter. After this, install the gutter back, screwing it with short screws.
Cleaning does not help you avoid the copy of this situation in the future. So, attach the upper part of the gutter by means of two screws. Then it will be easier to clean the trash, leaves, and animal’s shelter.
The solution of this task will need the use of a power drill, screws or other fasteners.
How to Protect Yourself from Danger
Indeed, preventing the above problems with gutters is not difficult. Even a child can cope with this.
A working on the roof carries many dangers and so before you start working you have to protect yourself.
First, put the gloves in your hands. Keep in mind that you must be dressed in protective, durable clothing. Then it will not pass chemical fumes and cause allergies.
Take the glasses. It is important because there is dust, and sometimes animals in the gutters. Besides, you need to remove all the leaves and debris before you start to repair the gutters.
Use a spatula with a rubber base to prevent damage to the material, and to not loosen the screws.
Prepare all the necessary tools in advance. For example, to pre-clean the gutters, you will need a rubberized spatula, and to replace the damaged part of the gutter – screws, and drill.
Your work will take place on the ladder, so choose a sturdy ladder without defects, which will stand firmly in place. Tell people that you are going to repair the roof, but rather invite a partner.
Leakage of the gutter is an undesirable thing. Because of that, the foundation and walls of your house are under threat.
To not wake up in a puddle and keep comfort inside the house, regularly check the gutters. Check and clean the gutters as frequent as you can, especially if the climate is too rainy.
There can be a lot of debris or defects – all this you must drop as soon as possible. And you already know how to do this.